WORKS/Ohlins R&T "SPORT" Coilover Suspension - FR-S / BRZ / 86

For over 30 years, Ohlins has been known for developing state-of-the-art suspension for competition use. This advanced technology is now available for street cars all over the world!

Ohlins Road & Track suspension features Dual Flow Valve (DFV) technology. Offering drivers superior road handling characteristics without sacrificing comfort with daily use. DFV dampers are fully adjustable and can be tailored to fit the needs of any driver with a few clicks of the adjuster knob.

Not only are Ohlins known for their amazing handling characteristics; They hold their own in terms of quality and reliability. These coilovers have been designed with an emphasis on lightweight aluminum components and are put through various corrosion tests; meeting ISO 9227 Standards. The end result is a 2-year limited warranty on all Ohlins products

Here at WORKS, we have partnered with Ohlins to offer custom coilover packages to best meet the needs of any BRZ/FRS/86 Enthusiast. Making a few key improvements; the WORKS custom coilover packages drastically increase road feel and adjustability over the standard R&T coilover

The WORKS "Sport" package features 50 N/mm Front and 60N/mm Rear spring rates.

We have found this combination to be best suited for the daily driver or weekend warrior looking to get the most out of their Toyobaru. These spring rates are ideal if the vehicle is used primarily on the street.

Spring rate conversion chart:

N/mm	KG/mm	lb/in
50	5.1	285
60	6.1	343
70	7.1	400
80	8.2	457
90	9.2	514
100	10.2	571

While the factory Ohlins require the use of the OEM strut hats - all WORKS/Ohlins coilover packages utilize upgraded front camber plates. WORKS camber plates feature a pillow ball spherical mount and seemingly endless adjustability to fine tune your camber alignment. These mounts can provide nearly 3 degrees of negative camber and are crafted from high-strength, lightweight aluminum

After extensive research: we have found that the use of factory sway bar endlinks (With an aftermarket sway bar and certain aftermarket coilovers) can potentially result in interference between the sway bar and front lower control arms. We have partnered with SuperPro to offer adjustable endlinks to alleviate this condition and allow for fine tuning of the font sway bar!

Fronts:

• WORKS Camber Plates
• Ohlins McPherson Strut
• Coil Srpings (50 N/mm)
• Height adjustable
• Spring preload adjuster
• Single bleed adjuster
• Dustcovers

Rears:

• Ohlins Conventional Shock Absorber
• Height adjustable
• Length adjuster
• Single bleed adjuster
• Spring preload adjuster
• Coil springs (60 N/mm)
• Dust covers

WORKS/Ohlins R&T "TRACK" Coilover Suspension - BRZ / FR-S / 86

�hlins is the world leader in advanced suspension technology.
The new WORKS/�hlins Stage III Road & Track coilovers for the FR-S and BRZ continue the advancement of the DFV (Dual Flow Valve) components. This kit is designed to enhance 86's during track and autocross events while still keeping daily street use in mind. External features include independent ride height and spring pre-load. The DFVs are also constructed with aluminum casings for strength and weight savings. Inside, the enhanced valving offers improved control without sacrificing ride quality. The adjustable front plates give you the option of increasing negative camber to the front wheels that allow for better grip during aggressive driving. The advantage of using a rear pillow ball upper shock mount is that your vehicle will achieve better response from the rear shock absorbers, which yields a much better and more confident feeling from the vehicle. All WORKS/�hlins coilovers are available with custom spring rates and in-house custom valving through the WORKS Racing Program. Please feel free to call for consultation. Lightweight Swift Springs are available as an option. Installation instructions are included. WORKS/�hlins coilovers are recommended for use with WORKS sway bars as part of our Suspension Packages.

WORKS/Ohlins R&T "The WORKS" Coilover Suspension - FR-S / BRZ / 86

�hlins is the world leader in advanced suspension technology.
The new WORKS/�hlins Stage III Road & Track coilovers for the FR-S and BRZ continue the advancement of the DFV (Dual Flow Valve) components. This kit is designed to enhance 86's during track and autocross events while still keeping daily street use in mind. External features include independent ride height and spring pre-load. The DFVs are also constructed with aluminum casings for strength and weight savings. Inside, the enhanced valving offers improved control without sacrificing ride quality. The adjustable front plates give you the option of increasing negative camber to the front wheels that allow for better grip during aggressive driving. The advantage of using a rear pillow ball upper shock mount is that your vehicle will achieve better response from the rear shock absorbers, which yields a much better and more confident feeling from the vehicle. All WORKS/�hlins coilovers are available with custom spring rates and in-house custom valving through the WORKS Racing Program. Please feel free to call for consultation. Lightweight Swift Springs are available as an option. Installation instructions are included. WORKS/�hlins coilovers are recommended for use with WORKS sway bars as part of our Suspension Packages.

WORKS Urethane Suspension Bushing Kit w/ Front Caster and Rear Camber

WORKS / Superpro Complete Chassis Bushing Kit

WORKS Adjustable Camber Plates (Front) - BRZ / FRS / 86

WORKS WRP Front Adjustable Camber Plates featuring a pillow ball mount are ideal for any autocross, track or street enthusiast who's looking for more range than what eccentric camber bolts have to offer in addition to more precision. Simply replace the upper portion of your stock strut assembly for nearly infinite adjustability. With the proper set-up these plates can provide -3 degrees of negative camber.

These are also a perfect addition for the OEM stock struts or coilovers such at the Ohlins.

Anodized Aluminum plates are indexed for ease of alignment and the spherical bearing Ball and Race are heat treated Stainless Steel with Teflon liner. The bearings are also replaceable and sold separately.

Application: 2012-2022 Subaru BRZ, Scion FR-S and Toyota 86 and GR86 All

SuperPro/WORKS Rear Differential Pinion Mount Kit

The SuperPro/WORKS Urethane Suspension Bushings made by SuperPro will firm up all of the front and rear suspension points as well as the chassis and various drivetrain components (all of which are originally mounted using traditional rubber). These may not provide the same level of comfort as the stock rubber pieces, but will give the driver a more direct, responsive feel for the serious driving enthusiast.

SuperPro/WORKS bushings are constructed from medical-grade super high quality urethane with minimal porosity and the highest durability of any automotive bushing available!

Swift Spec-R Springs - Subaru BRZ Toyota GR86

Swift Springs Spec-R Subaru BRZ Toyota GR86

SuperPro/WORKS Steering Rack & Pinion Kit

The SuperPro/WORKS Urethane Suspension Bushings made by SuperPro will firm up all of the front and rear suspension points as well as the chassis and various drivetrain components (all of which are originally mounted using traditional rubber). These may not provide the same level of comfort as the stock rubber pieces, but will give the driver a more direct, responsive feel for the serious driving enthusiast.

SuperPro/WORKS bushings are constructed from medical-grade super high quality urethane with minimal porosity and the highest durability of any automotive bushing available.

SuperPro Front Sway Bar Link Kit - Heavy Duty Adjustable 12mm Ball Joint Adjustable Link

Designed to maximise the benefit of Roll Control Adjustable Sway Bars and be used in place of that hard to find O.E link.

SuperPro Rear Control Arm Lower & Adjustable Toe Control Arm Kit

SuperPro Rear Control Arm Lower & Adjustable Toe Control Arm Kit.

Left and Right Performance Upgrade Kit with Camber and Toe Adjustment

Product Specifications:

• Components Per Product: 4ARMS,8B,4T

Vehicle Application Information:

• Adjustment Range: +/- 3 Degrees Toe and +/- 2.0 Degrees of Camber

Alignment Correction. Camber & Toe Adjustable.

SuperPro Rear Adjustable Toe Control Arm Kit

Rear Adjustable Toe Control Arm Kit

SuperPro/WORKS Rear Sway Bar Link & Bushing Kit

The SuperPro/WORKS Urethane Suspension Bushings made by SuperPro will firm up all of the front and rear suspension points as well as the chassis and various drivetrain components (all of which are originally mounted using traditional rubber). These may not provide the same level of comfort as the stock rubber pieces, but will give the driver a more direct, responsive feel for the serious driving enthusiast.

SuperPro/WORKS bushings are constructed from medical-grade super high quality urethane with minimal porosity and the highest durability of any automotive bushing available.

Verus FR-S / BRZ / 86 REAR LOWER CONTROL ARMS

Adjust rear camber easily with the lightest LCA units on the market. Weighing in at 2lbs and 10oz, these are nearly a pound lighter per side than OEM.

CNC crafted from 7000 series aluminum for superior strength to weight on a design dictated through extensive FEA, bench, and real-world testing. Perfect for street and track cars alike.
Please specify either Black, Blue, or Red

*For cars with auto headlight level sensors, purchase to hook up the sensor to our LCAs, PN A0104A!*

Includes:

• Rear Lower Control Arm (2)
• Spherical or Polyurethane Inboard Mounting
• Hardware Kit, Includes All Necessary Hardware for a Seamless Install

SuperPro/WORKS Front Lower Control Arm Inner Front & Rear Kit

The SuperPro/WORKS Urethane Suspension Bushings made by SuperPro will firm up all of the front and rear suspension points as well as the chassis and various drivetrain components (all of which are originally mounted using traditional rubber). These may not provide the same level of comfort as the stock rubber pieces, but will give the driver a more direct, responsive feel for the serious driving enthusiast.

SuperPro/WORKS bushings are constructed from medical-grade super high quality urethane with minimal porosity and the highest durability of any automotive bushing available.

SuperPro/WORKS Front Lower Control Arm Inner Offset Front & Rear Kit

The SuperPro/WORKS Urethane Suspension Bushings made by SuperPro will firm up all of the front and rear suspension points as well as the chassis and various drivetrain components (all of which are originally mounted using traditional rubber). These may not provide the same level of comfort as the stock rubber pieces, but will give the driver a more direct, responsive feel for the serious driving enthusiast.

SuperPro/WORKS bushings are constructed from medical-grade super high quality urethane with minimal porosity and the highest durability of any automotive bushing available.

SuperPro/WORKS Front Sway Bar Mount To Chassis Bushing

The WORKS Urethane Suspension Bushings made by SuperPro will firm up all of the front and rear suspension points as well as the chassis and various drivetrain components (all of which are originally mounted using traditional rubber). These may not provide the same level of comfort as the stock rubber pieces, but will give the driver a more direct, responsive feel for the serious driving enthusiast.
WORKS bushings are constructed from medical-grade super high quality urethane with minimal porosity and the highest durability of any automotive bushing available.

The full WRP Urethane Suspension Bushing Kit is also available.
*WRP (WORKS Racing Program) items are engineered to provide increased extreme performance and may not be intended for use on public roads.

SuperPro/WORKS Rear Toe Control Arm Inner Kit

The SuperPro/WORKS Urethane Suspension Bushings made by SuperPro will firm up all of the front and rear suspension points as well as the chassis and various drivetrain components (all of which are originally mounted using traditional rubber). These may not provide the same level of comfort as the stock rubber pieces, but will give the driver a more direct, responsive feel for the serious driving enthusiast.

SuperPro/WORKS bushings are constructed from medical-grade super high quality urethane with minimal porosity and the highest durability of any automotive bushing available.

SuperPro/WORKS Rear Trailing Arm Rear Bushing Kit

The SuperPro/WORKS Urethane Suspension Bushings made by SuperPro will firm up all of the front and rear suspension points as well as the chassis and various drivetrain components (all of which are originally mounted using traditional rubber). These may not provide the same level of comfort as the stock rubber pieces, but will give the driver a more direct, responsive feel for the serious driving enthusiast.

SuperPro/WORKS bushings are constructed from medical-grade super high quality urethane with minimal porosity and the highest durability of any automotive bushing available.

SuperPro/WORKS Rear Lower Control Arm Inner Kit

The SuperPro/WORKS Urethane Suspension Bushings made by SuperPro will firm up all of the front and rear suspension points as well as the chassis and various drivetrain components (all of which are originally mounted using traditional rubber). These may not provide the same level of comfort as the stock rubber pieces, but will give the driver a more direct, responsive feel for the serious driving enthusiast.

SuperPro/WORKS bushings are constructed from medical-grade super high quality urethane with minimal porosity and the highest durability of any automotive bushing available.

SuperPro/WORKS Crossmember Insert Enhancement Kit

The SuperPro/WORKS Urethane Suspension Bushings made by SuperPro will firm up all of the front and rear suspension points as well as the chassis and various drivetrain components (all of which are originally mounted using traditional rubber). These may not provide the same level of comfort as the stock rubber pieces, but will give the driver a more direct, responsive feel for the serious driving enthusiast.

SuperPro/WORKS bushings are constructed from medical-grade super high quality urethane with minimal porosity and the highest durability of any automotive bushing available.

SuperPro/WORKS Rear Upper Control Arm Bushing - Inner Camber Correction

The SuperPro/WORKS Urethane Suspension Bushings made by SuperPro will firm up all of the front and rear suspension points as well as the chassis and various drivetrain components (all of which are originally mounted using traditional rubber). These may not provide the same level of comfort as the stock rubber pieces, but will give the driver a more direct, responsive feel for the serious driving enthusiast.

SuperPro/WORKS bushings are constructed from medical-grade super high quality urethane with minimal porosity and the highest durability of any automotive bushing available.

The rear camber adjusting kit consisting of a complete set of upper control arm replacement polyurethane bushings. Camber adjustment can be performed quickly & accurately and allows ~+/-0.8 deg. of camber adjustment. A must for lowered vehicles. Low compliance bushings provide further handling enhancement.
Includes eight urethane bushings and four eccentric tubes.

SuperPro/WORKS Rear Sway Bar Mount to Chassis Bushing

The SuperPro/WORKS Urethane Suspension Bushings made by SuperPro will firm up all of the front and rear suspension points as well as the chassis and various drivetrain components (all of which are originally mounted using traditional rubber). These may not provide the same level of comfort as the stock rubber pieces, but will give the driver a more direct, responsive feel for the serious driving enthusiast.

SuperPro/WORKS bushings are constructed from medical-grade super high quality urethane with minimal porosity and the highest durability of any automotive bushing available.

SuperPro/WORKS Rr Subframe to Chassis Mount Bushing Kit

The SuperPro/WORKS Urethane Suspension Bushings made by SuperPro will firm up all of the front and rear suspension points as well as the chassis and various drivetrain components (all of which are originally mounted using traditional rubber). These may not provide the same level of comfort as the stock rubber pieces, but will give the driver a more direct, responsive feel for the serious driving enthusiast.

Suspension subframes form the connection between the suspension and the vehicle's body and passenger compartment.

These are one of the key areas vehicle manufacturers use to tune the passenger comfort and isolation. This means in many vehicles the bushings that soft heavily-voided rubber is used. As this rubber ages and degrades it allows significant movement in the suspension mounting which impacts traction, handling and control.

In more powerful vehicles the original soft rubber bushings can also contribute to wheel hop under acceleration and significant movement in changing loads or gear changes - all of which sap performance and reduce passenger comfort.

SuperPro/WORKS bushings are constructed from medical-grade super high quality urethane with minimal porosity and the highest durability of any automotive bushing available.

SuperPro/WORKS Rr Diff to Subframe Mount Bushing Kit

The SuperPro/WORKS Urethane Suspension Bushings made by SuperPro will firm up all of the front and rear suspension points as well as the chassis and various drivetrain components (all of which are originally mounted using traditional rubber). These may not provide the same level of comfort as the stock rubber pieces, but will give the driver a more direct, responsive feel for the serious driving enthusiast.

SuperPro/WORKS bushings are constructed from medical-grade super high quality urethane with minimal porosity and the highest durability of any automotive bushing available with a lifetime warranty.

SuperPro/WORKS Rear Trailing Arm Front Bushing

The SuperPro/WORKS Urethane Suspension Bushings made by SuperPro will firm up all of the front and rear suspension points as well as the chassis and various drivetrain components (all of which are originally mounted using traditional rubber). These may not provide the same level of comfort as the stock rubber pieces, but will give the driver a more direct, responsive feel for the serious driving enthusiast.

SuperPro/WORKS bushings are constructed from medical-grade super high quality urethane with minimal porosity and the highest durability of any automotive bushing available.

SuperPro Rear Sway Bar Mount Bush Kit 20mm

SuperPro Rear Sway Bar Bushing Kit.

Suits Larger Rear Bar Size - 20mm
Also Available In 14, 15, 16, 18, 19, 20, 21, 22, 23 & 25mm (please call 707-933-3893)

The SuperPro/WORKS Urethane Suspension Bushings made by SuperPro will firm up all of the front and rear suspension points as well as the chassis and various drivetrain components (all of which are originally mounted using traditional rubber). These may not provide the same level of comfort as the stock rubber pieces, but will give the driver a more direct, responsive feel for the serious driving enthusiast.

SuperPro/WORKS bushings are constructed from medical-grade super high quality urethane with minimal porosity and the highest durability of any automotive bushing available.

SuperPro Rear Control Arm Lower Complete Adjustable Arm Kit

SuperPro Rear Control Arm Lower Complete Adjustable Arm Kit.

Left and Right Rear Arm Assemblies with SuperPro Bushings

• SuperPro's camber adjustable rear lower control arm set is a must-have for lowered vehicles that pick up excessive negative camber in the rear when lowered.

  They also allow you to dial in rear camber in any performance alignment.

  Eccentric washers and easy-to-use hardware make for quick work on the alignment rack or when doing your own alignment and set up work.

  Range of Adjustment: +/- 1.0� Rear Camber