WORKS High-Flow Drop-In Air Filter - 2017+ Manual BRZ/86 Only
Better air flow means more power. Cleaner air means increased engine longevity. Now you can have the best of both worlds with the WORKS High-flow Drop-in Air Filter. This direct drop-in replacement for the factory filter retains stock drivability and can flow more than twice as much as the stock filter. Constructed of multilayer, uniform cotton fabric with stainless steel mesh reinforcement, this unit will filter particles down to several microns with very high saturation capacity. The reusable element is easily cleaned, re-oiled and back in your factory airbox in a matter of minutes with the WORKS Service Kit. Pays for itself after only 3 to 4 scheduled maintenance periods and lasts a lifetime! Includes one carefully pre-oiled filter and simple installation instructions.
WORKS Grab Shift Knob - M12 x 1.25mm
The WORKS Grab is a CNC machined, full billet 6061 aluminum shift knob. Beautifully bead blasted, hard anodized and machined with the "WORKS" logo (like Lotus & Ferrari), this engineered WORK of art has the right "feel" (50mm/2") and heft (173gr/6.1oz) to provide confident throws.
SuperPro/WORKS Rear Sway Bar Link & Bushing Kit
The SuperPro/WORKS Urethane Suspension Bushings made by SuperPro will firm up all of the front and rear suspension points as well as the chassis and various drivetrain components (all of which are originally mounted using traditional rubber). These may not provide the same level of comfort as the stock rubber pieces, but will give the driver a more direct, responsive feel for the serious driving enthusiast.
SuperPro/WORKS bushings are constructed from medical-grade super high quality urethane with minimal porosity and the highest durability of any automotive bushing available.
WORKS Blue Brake Pads - BRZ/FR-S/86
Choosing the correct brake pad material is essential for good stopping performance. For street driven cars an OEM type pad may work fine, but once your car is driven aggressively or ventures out onto the track, stock pads become obsolete.
WORKS has developed a brake pad specifically designed for someone who is going to primarily drive their car on the street but also wants to take it occasionally to the track. With a maximum operating temperature of 950* F this compound will grip better under high temperatures, but unlike a pure racing compound the WORKS Blue pads come up to operating temperature quickly. The WORKS Blue brake pads also work fine with a stock rotor setup unlike other more aggressive pads that will quickly eat up the OEM rotors. In addition they will give you nearly silent operation when used in conjunction with the factory shims and installed properly. If you are planning the occasional track day, or are a track novice and want a great setup for both the road and track, the WORKS Blue brake pads are for you.
The price is for front pads only. See "Options" for fronts, rears or a full set.
WORKS Embroidered Floor Mats - BRZ 2022+
The WORKS Embroidered Floor Mats are a stylish and durable replacement to your dull and worn-out OEM mats. Our mats feature premium two-ply Nylon yarn in a 32 ounce per yard construction which is twice the weight and density of original equipment mats combined with 5/16" pile height that provide impressive long wear and comfort. The 4 layer backing construction includes a water-resistant layer to help block moisture and a heavy latex layer that creates stiffness for mat shape. They come in a charcoal-grey that was specifically chosen to match the OEM carpet and have beautifully embroidered "WORKS" logos available in red, black or silver! Last, our mats have broader carpet coverage and utilize the factory anchor devices. Make sure to take a look at
our matching floor mat as well!
WORKS Embroidered Trunk Mat - BRZ 2022+
An excellent compliment to our WORKS floor mats is the new WORKS Trunk Mat is a high quality replacement for the flimsy OEM unit. Our mats feature premium two-ply Nylon yarn in a 32 ounce per yard construction which is twice the weight and density of original equipment mats combined with a plush 8mm pile height that provide impressive long wear and comfort. The 4 layer backing construction includes a water-resistant layer to help block moisture and a heavy latex layer that creates stiffness for mat shape. They come in a charcoal-grey that was specifically chosen to match the OEM carpet and have beautifully embroidered "WORKS" logos available in red, black or silver!
SuperPro Rear Control Arm Lower Complete Adjustable Arm Kit
SuperPro Rear Control Arm Lower Complete Adjustable Arm Kit.
Left and Right Arm Assemblies with SuperPro Bushings
Vehicle Application Information:
- +/- 1 Degree Camber Adjustment available
- Designed to suit Subaru WRX 2015-2020
- Designed to suit Subaru WRX STI 2015-2020
- Designed to suit Subaru BRZ 2013-2022
- Designed to suit FR-S / 86 / GR86 2013-2022
WORKS Adjustable Camber Plates (Front) - BRZ / FRS / 86
WORKS WRP Front Adjustable Camber Plates featuring a pillow ball mount are ideal for any autocross, track or street enthusiast who's looking for more range than what eccentric camber bolts have to offer in addition to more precision. Simply replace the upper portion of your stock strut assembly for nearly infinite adjustability. With the proper set-up these plates can provide -3 degrees of negative camber.
These are also a perfect addition for the OEM stock struts or coilovers such at the Ohlins.
Anodized Aluminum plates are indexed for ease of alignment and the spherical bearing Ball and Race are heat treated Stainless Steel with Teflon liner. The bearings are also replaceable and sold separately.
Application: 2012-2022 Subaru BRZ, Scion FR-S and Toyota 86 and GR86 All
SuperPro Rear Control Arm Lower & Adjustable Toe Control Arm Kit
SuperPro Rear Control Arm Lower & Adjustable Toe Control Arm Kit.
Left and Right Performance Upgrade Kit with Camber and Toe Adjustment
Product Specifications:
- Components Per Product: 4ARMS,8B,4T
Vehicle Application Information:
- Adjustment Range: +/- 3 Degrees Toe and +/- 2.0 Degrees of Camber
Alignment Correction. Camber & Toe Adjustable.
- Designed to suit Subaru WRX 2008-2020
- Designed to suit Subaru WRX STI 2008-2020
- Designed to suit Subaru BRZ 2012-2022
- Designed to suit Toyota 86/Scion FR-S/GR86 2012-2022
Stance FR-S / / 86 BRZ REAR LOWER CONTROL ARMS V1.0 25MM DROP
STANCE Rear Lower control Arms are an ideal suspension modification
after lowering any FR-S or BRZ. The LCA will allow for proper rear
camber adjustment and aid in maximizing handling and braking abilities
while saving tires from uneven tread wear. In addition the arms will
also keep the camber true during hard/competition drifting or racing by
eliminating soft rubber bushings. STANCE LCA were designed to raise the
hub, which lowers the car by 25mm. In return, this increases bump stroke
and maximizes rebound stroke.
Stance FR-S / BRZ / 86 REAR LOWER CONTROL ARMS V2.0 WITH 60MM DROP
STANCE V2.0 Rear Lower control Arms are an ideal suspension modification
after lowering any FR-S or BRZ. The LCA will allow for proper rear
camber adjustment and aid in maximizing handling and braking abilities
while saving tires from uneven tread wear. In addition the arms will
also keep the camber true during hard/competition drifting or racing by
eliminating soft rubber bushings. STANCE V2.0 LCA were designed to raise
the hub, which lowers the car by 60mm. In return, this increases bump
stroke and maximizes rebound stroke.
WORKS/Ohlins R&T "SPORT" Coilover Suspension - FR-S / BRZ / 86
For over 30 years, Ohlins has been known
for developing state-of-the-art suspension for competition use. This advanced
technology is now available for street cars all over the world!
Ohlins Road & Track suspension
features Dual Flow Valve (DFV) technology. Offering drivers superior road
handling characteristics without sacrificing comfort with daily use. DFV
dampers are fully adjustable and can be tailored to fit the needs of any driver
with a few clicks of the adjuster knob.
Not only are Ohlins known for their
amazing handling characteristics; They hold their own in terms of quality and
reliability. These coilovers have been designed with an emphasis on lightweight
aluminum components and are put through various corrosion tests; meeting ISO
9227 Standards. The end result is a 2-year limited warranty on all Ohlins
products
Here at WORKS, we have partnered with
Ohlins to offer custom coilover packages to best meet the needs of any
BRZ/FRS/86 Enthusiast. Making a few key improvements; the WORKS custom coilover
packages drastically increase road feel and adjustability over the standard
R&T coilover
The WORKS "Sport" package features 50
N/mm Front and 60N/mm Rear spring rates.
We have found this combination to be
best suited for the daily driver or weekend warrior looking to get the most out
of their Toyobaru. These spring rates are ideal if the vehicle is used
primarily on the street.
Spring rate conversion chart:
|
N/mm
|
KG/mm
|
lb/in
|
|
50
|
5.1
|
285
|
|
60
|
6.1
|
343
|
|
70
|
7.1
|
400
|
|
80
|
8.2
|
457
|
|
90
|
9.2
|
514
|
|
100
|
10.2
|
571
|
While the factory Ohlins require the
use of the OEM strut hats - all WORKS/Ohlins coilover packages utilize upgraded
front camber plates. WORKS camber plates feature a pillow ball spherical mount and
seemingly endless adjustability to fine tune your camber alignment. These mounts
can provide nearly 3 degrees of negative camber and are crafted from high-strength,
lightweight aluminum
After extensive research: we have found
that the use of factory sway bar endlinks (With an aftermarket sway bar and
certain aftermarket coilovers) can potentially result in interference between
the sway bar and front lower control arms. We have partnered with SuperPro to
offer adjustable endlinks to alleviate this condition and allow for fine tuning
of the font sway bar!
Fronts:
- WORKS Camber Plates
- Ohlins McPherson Strut
- Coil Srpings (50 N/mm)
- Height adjustable
- Spring preload adjuster
- Single bleed adjuster
- Dustcovers
Rears:
- Ohlins Conventional Shock Absorber
- Height adjustable
- Length adjuster
- Single bleed adjuster
- Spring preload adjuster
- Coil springs (60 N/mm)
- Dust covers
Our Price: $2,549.00
Total Price: $2,339.00
Save $210.00!
WORKS/Ohlins R&T "TRACK" Coilover Suspension - BRZ / FR-S / 86
Öhlins is the world leader in advanced suspension technology.
The new WORKS/Öhlins Stage III Road & Track coilovers for the FR-S and BRZ continue the advancement of the DFV (Dual Flow Valve) components. This kit is designed to enhance 86's during track and autocross events while still keeping daily street use in mind. External features include independent ride height and spring pre-load. The DFVs are also constructed with aluminum casings for strength and weight savings. Inside, the enhanced valving offers improved control without sacrificing ride quality. The adjustable front plates give you the option of increasing negative camber to the front wheels that allow for better grip during aggressive driving. The advantage of using a rear pillow ball upper shock mount is that your vehicle will achieve better response from the rear shock absorbers, which yields a much better and more confident feeling from the vehicle. All WORKS/Öhlins coilovers are available with custom spring rates and in-house custom valving through the WORKS Racing Program. Please feel free to call for consultation. Lightweight Swift Springs are available as an option. Installation instructions are included. WORKS/Öhlins coilovers are recommended for use with WORKS sway bars as part of our Suspension Packages.
Our Price: $3,099.00
Total Price: $2,879.00
Save $220.00!
WORKS/Ohlins R&T "The WORKS" Coilover Suspension - FR-S / BRZ / 86
Öhlins is the world leader in advanced suspension technology.
The new WORKS/Öhlins Stage III Road & Track coilovers for the FR-S and BRZ continue the advancement of the DFV (Dual Flow Valve) components. This kit is designed to enhance 86's during track and autocross events while still keeping daily street use in mind. External features include independent ride height and spring pre-load. The DFVs are also constructed with aluminum casings for strength and weight savings. Inside, the enhanced valving offers improved control without sacrificing ride quality. The adjustable front plates give you the option of increasing negative camber to the front wheels that allow for better grip during aggressive driving. The advantage of using a rear pillow ball upper shock mount is that your vehicle will achieve better response from the rear shock absorbers, which yields a much better and more confident feeling from the vehicle. All WORKS/Öhlins coilovers are available with custom spring rates and in-house custom valving through the WORKS Racing Program. Please feel free to call for consultation. Lightweight Swift Springs are available as an option. Installation instructions are included. WORKS/Öhlins coilovers are recommended for use with WORKS sway bars as part of our Suspension Packages.
Our Price: $3,449.00
Total Price: $3,239.00
Save $210.00!
