SuperPro/WORKS Rear Sway Bar Link & Bushing Kit
The SuperPro/WORKS Urethane Suspension Bushings made by SuperPro will firm up all of the front and rear suspension points as well as the chassis and various drivetrain components (all of which are originally mounted using traditional rubber). These may not provide the same level of comfort as the stock rubber pieces, but will give the driver a more direct, responsive feel for the serious driving enthusiast.
SuperPro/WORKS bushings are constructed from medical-grade super high quality urethane with minimal porosity and the highest durability of any automotive bushing available.
SuperPro Rear Control Arm Lower Complete Adjustable Arm Kit
SuperPro Rear Control Arm Lower Complete Adjustable Arm Kit.
Left and Right Arm Assemblies with SuperPro Bushings
Vehicle Application Information:
- +/- 1 Degree Camber Adjustment available
- Designed to suit Subaru WRX 2015-2020
- Designed to suit Subaru WRX STI 2015-2020
- Designed to suit Subaru BRZ 2013-2022
- Designed to suit FR-S / 86 / GR86 2013-2022
WORKS Adjustable Camber Plates (Front) - BRZ / FRS / 86
WORKS WRP Front Adjustable Camber Plates featuring a pillow ball mount are ideal for any autocross, track or street enthusiast who's looking for more range than what eccentric camber bolts have to offer in addition to more precision. Simply replace the upper portion of your stock strut assembly for nearly infinite adjustability. With the proper set-up these plates can provide -3 degrees of negative camber.
These are also a perfect addition for the OEM stock struts or coilovers such at the Ohlins.
Anodized Aluminum plates are indexed for ease of alignment and the spherical bearing Ball and Race are heat treated Stainless Steel with Teflon liner. The bearings are also replaceable and sold separately.
Application: 2012-2022 Subaru BRZ, Scion FR-S and Toyota 86 and GR86 All
SuperPro Rear Control Arm Lower & Adjustable Toe Control Arm Kit
SuperPro Rear Control Arm Lower & Adjustable Toe Control Arm Kit.
Left and Right Performance Upgrade Kit with Camber and Toe Adjustment
Product Specifications:
- Components Per Product: 4ARMS,8B,4T
Vehicle Application Information:
- Adjustment Range: +/- 3 Degrees Toe and +/- 2.0 Degrees of Camber
Alignment Correction. Camber & Toe Adjustable.
- Designed to suit Subaru WRX 2008-2020
- Designed to suit Subaru WRX STI 2008-2020
- Designed to suit Subaru BRZ 2012-2022
- Designed to suit Toyota 86/Scion FR-S/GR86 2012-2022
Stance FR-S / / 86 BRZ REAR LOWER CONTROL ARMS V1.0 25MM DROP
STANCE Rear Lower control Arms are an ideal suspension modification
after lowering any FR-S or BRZ. The LCA will allow for proper rear
camber adjustment and aid in maximizing handling and braking abilities
while saving tires from uneven tread wear. In addition the arms will
also keep the camber true during hard/competition drifting or racing by
eliminating soft rubber bushings. STANCE LCA were designed to raise the
hub, which lowers the car by 25mm. In return, this increases bump stroke
and maximizes rebound stroke.
Stance FR-S / BRZ / 86 REAR LOWER CONTROL ARMS V2.0 WITH 60MM DROP
STANCE V2.0 Rear Lower control Arms are an ideal suspension modification
after lowering any FR-S or BRZ. The LCA will allow for proper rear
camber adjustment and aid in maximizing handling and braking abilities
while saving tires from uneven tread wear. In addition the arms will
also keep the camber true during hard/competition drifting or racing by
eliminating soft rubber bushings. STANCE V2.0 LCA were designed to raise
the hub, which lowers the car by 60mm. In return, this increases bump
stroke and maximizes rebound stroke.
WORKS/Ohlins R&T "SPORT" Coilover Suspension - FR-S / BRZ / 86
For over 30 years, Ohlins has been known
for developing state-of-the-art suspension for competition use. This advanced
technology is now available for street cars all over the world!
Ohlins Road & Track suspension
features Dual Flow Valve (DFV) technology. Offering drivers superior road
handling characteristics without sacrificing comfort with daily use. DFV
dampers are fully adjustable and can be tailored to fit the needs of any driver
with a few clicks of the adjuster knob.
Not only are Ohlins known for their
amazing handling characteristics; They hold their own in terms of quality and
reliability. These coilovers have been designed with an emphasis on lightweight
aluminum components and are put through various corrosion tests; meeting ISO
9227 Standards. The end result is a 2-year limited warranty on all Ohlins
products
Here at WORKS, we have partnered with
Ohlins to offer custom coilover packages to best meet the needs of any
BRZ/FRS/86 Enthusiast. Making a few key improvements; the WORKS custom coilover
packages drastically increase road feel and adjustability over the standard
R&T coilover
The WORKS "Sport" package features 50
N/mm Front and 60N/mm Rear spring rates.
We have found this combination to be
best suited for the daily driver or weekend warrior looking to get the most out
of their Toyobaru. These spring rates are ideal if the vehicle is used
primarily on the street.
Spring rate conversion chart:
|
N/mm
|
KG/mm
|
lb/in
|
|
50
|
5.1
|
285
|
|
60
|
6.1
|
343
|
|
70
|
7.1
|
400
|
|
80
|
8.2
|
457
|
|
90
|
9.2
|
514
|
|
100
|
10.2
|
571
|
While the factory Ohlins require the
use of the OEM strut hats - all WORKS/Ohlins coilover packages utilize upgraded
front camber plates. WORKS camber plates feature a pillow ball spherical mount and
seemingly endless adjustability to fine tune your camber alignment. These mounts
can provide nearly 3 degrees of negative camber and are crafted from high-strength,
lightweight aluminum
After extensive research: we have found
that the use of factory sway bar endlinks (With an aftermarket sway bar and
certain aftermarket coilovers) can potentially result in interference between
the sway bar and front lower control arms. We have partnered with SuperPro to
offer adjustable endlinks to alleviate this condition and allow for fine tuning
of the font sway bar!
Fronts:
- WORKS Camber Plates
- Ohlins McPherson Strut
- Coil Srpings (50 N/mm)
- Height adjustable
- Spring preload adjuster
- Single bleed adjuster
- Dustcovers
Rears:
- Ohlins Conventional Shock Absorber
- Height adjustable
- Length adjuster
- Single bleed adjuster
- Spring preload adjuster
- Coil springs (60 N/mm)
- Dust covers
WORKS/Ohlins R&T "TRACK" Coilover Suspension - BRZ / FR-S / 86
Öhlins is the world leader in advanced suspension technology.
The new WORKS/Öhlins Stage III Road & Track coilovers for the FR-S and BRZ continue the advancement of the DFV (Dual Flow Valve) components. This kit is designed to enhance 86's during track and autocross events while still keeping daily street use in mind. External features include independent ride height and spring pre-load. The DFVs are also constructed with aluminum casings for strength and weight savings. Inside, the enhanced valving offers improved control without sacrificing ride quality. The adjustable front plates give you the option of increasing negative camber to the front wheels that allow for better grip during aggressive driving. The advantage of using a rear pillow ball upper shock mount is that your vehicle will achieve better response from the rear shock absorbers, which yields a much better and more confident feeling from the vehicle. All WORKS/Öhlins coilovers are available with custom spring rates and in-house custom valving through the WORKS Racing Program. Please feel free to call for consultation. Lightweight Swift Springs are available as an option. Installation instructions are included. WORKS/Öhlins coilovers are recommended for use with WORKS sway bars as part of our Suspension Packages.
WORKS/Ohlins R&T "The WORKS" Coilover Suspension - FR-S / BRZ / 86
Öhlins is the world leader in advanced suspension technology.
The new WORKS/Öhlins Stage III Road & Track coilovers for the FR-S and BRZ continue the advancement of the DFV (Dual Flow Valve) components. This kit is designed to enhance 86's during track and autocross events while still keeping daily street use in mind. External features include independent ride height and spring pre-load. The DFVs are also constructed with aluminum casings for strength and weight savings. Inside, the enhanced valving offers improved control without sacrificing ride quality. The adjustable front plates give you the option of increasing negative camber to the front wheels that allow for better grip during aggressive driving. The advantage of using a rear pillow ball upper shock mount is that your vehicle will achieve better response from the rear shock absorbers, which yields a much better and more confident feeling from the vehicle. All WORKS/Öhlins coilovers are available with custom spring rates and in-house custom valving through the WORKS Racing Program. Please feel free to call for consultation. Lightweight Swift Springs are available as an option. Installation instructions are included. WORKS/Öhlins coilovers are recommended for use with WORKS sway bars as part of our Suspension Packages.
