For over 30 years, Ohlins has been known
for developing state-of-the-art suspension for competition use. This advanced
technology is now available for street cars all over the world!
Ohlins Road & Track suspension
features Dual Flow Valve (DFV) technology. Offering drivers superior road
handling characteristics without sacrificing comfort with daily use. DFV
dampers are fully adjustable and can be tailored to fit the needs of any driver
with a few clicks of the adjuster knob.
Not only are Ohlins known for their
amazing handling characteristics; They hold their own in terms of quality and
reliability. These coilovers have been designed with an emphasis on lightweight
aluminum components and are put through various corrosion tests; meeting ISO
9227 Standards. The end result is a 2-year limited warranty on all Ohlins
products
Here at WORKS, we have partnered with
Ohlins to offer custom coilover packages to best meet the needs of any
BRZ/FRS/86 Enthusiast. Making a few key improvements; the WORKS custom coilover
packages drastically increase road feel and adjustability over the standard
R&T coilover
The WORKS "Sport" package features 50
N/mm Front and 60N/mm Rear spring rates.
We have found this combination to be
best suited for the daily driver or weekend warrior looking to get the most out
of their Toyobaru. These spring rates are ideal if the vehicle is used
primarily on the street.
Spring rate conversion chart:
|
N/mm
|
KG/mm
|
lb/in
|
|
50
|
5.1
|
285
|
|
60
|
6.1
|
343
|
|
70
|
7.1
|
400
|
|
80
|
8.2
|
457
|
|
90
|
9.2
|
514
|
|
100
|
10.2
|
571
|
While the factory Ohlins require the
use of the OEM strut hats - all WORKS/Ohlins coilover packages utilize upgraded
front camber plates. WORKS camber plates feature a pillow ball spherical mount and
seemingly endless adjustability to fine tune your camber alignment. These mounts
can provide nearly 3 degrees of negative camber and are crafted from high-strength,
lightweight aluminum
After extensive research: we have found
that the use of factory sway bar endlinks (With an aftermarket sway bar and
certain aftermarket coilovers) can potentially result in interference between
the sway bar and front lower control arms. We have partnered with SuperPro to
offer adjustable endlinks to alleviate this condition and allow for fine tuning
of the font sway bar!
Fronts:
- WORKS Camber Plates
- Ohlins McPherson Strut
- Coil Srpings (50 N/mm)
- Height adjustable
- Spring preload adjuster
- Single bleed adjuster
- Dustcovers
Rears:
- Ohlins Conventional Shock Absorber
- Height adjustable
- Length adjuster
- Single bleed adjuster
- Spring preload adjuster
- Coil springs (60 N/mm)
- Dust covers
