Home > Mitsubishi > Lancer 2008-2017 >

Whiteline Camber adj kit-control arm upper bushe

Whiteline Camber adj kit-control arm upper bushe
 
*All other Whiteline products are available through WORKS. Call 707-933-3893 or email info@worksmotorsports.com
Our Price: $127.88


Product Code: WHI.KCA329
Qty:

Description Applications
 
Key Feature and Benefit
KCA329 is a rear camber adjusting kit consisting of a complete set of upper control arm replacement polyurethane bushes. Utilizing short-long bolt turning mechanism camber adjustment can be performed quickly & accurately live on-car while on wheel alignment jig. Low compliance bushing provide further h&ling enhancement.

Features and Benefits

Whiteline Alignment Products

Camber is the inclination of the wheel from the vertical when viewed from the front. When the top of the wheel leans out you have positive camber, lean in equal’s negative camber. Static negative camber is used to compensate for body roll, body distortion and tyre roll under when cornering.

Caster is the backward or forward tilt of the steering axis. Vehicle manufacturers are aware of the advantages of caster and as each new model is released the amount of caster specified increases. High levels of positive caster equate to dynamic negative camber on turn when you need it most. Whiteline continues to put heavy emphasis on additional positive caster when designing new suspension packages.

Toe describes how close to parallel the two tyres are, and whether they are toed-in (closer at the front of the tyre) or toed-out (closer at the rear of the tyre). The goal of toe is to provide proper tyre wear through various driving conditions. The amount of toe your suspension is set to varies by the drive layout of your vehicle, driving preference, and car's handling characteristics.

"Anti" features in suspension systems are a characteristic that can be used to influence the stiffness of the front or rear suspension under traction forces(under braking or accelerating). The individual terms are relatively straightforward and self-explanatory with the “anti” reducing or totally restricting the characteristic (lifting or diving). In the front suspension there may be levels of anti-dive during braking and anti-lift during accelerating (assuming traction to the front wheels is present), similarly in the rear there could be anti lift during braking and anti-squat during acceleration.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Mitsubishi > Lancer 2008-2017
Mitsubishi > Lancer Ralliart 2009-2015
Mitsubishi > Lancer Ralliart 2009-2015 > SUSPENSION & CHASSIS
Mitsubishi > Lancer 2008-2017 > SUSPENSION & CHASSIS
Mitsubishi