The OpenPort 2.0 is the latest tuning tool hardware that is capable of communicating with a most OBDII compliant vehicles using a standard J2534 interface. Combined with the EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Mitsubishi vehicles, and support for other cars is always expanding.
We include a USB cable with each OpenPort, which is all the hardware you'll need for your 2008+ Mitsubishi Evo and Lancer unless you have one of the few vehicles that require a separate reflash
adapter. For Subaru you'll only need a reflash adapter for the 2001
through 2005 WRX, but not STi, unless you're working on an early non
USDM STi in which case you made need one of our WRX adapters. No other
Subaru vehicles require reflash adapters including Forester, Baja,
Legacy, or naturally aspirated Impreza models. For Mitsubishi, you'll
need the adapter for most pre CAN vehicles which include the 5-9 Evo.
Choose the adapter you need from the 'Reflash Adapters' drop down list
on the right side of this page.
*This is also the cable you need for PassThruCAN with the Mitsubishi Evo X MR and 2009-2015 Ralliart
Technical Details
- 72Mhz 32-bit processor
- USB 2.0 full speed device (USB-A/Mini cable included)
- Field upgradeable software
- Supports these major OBD protocols:
CAN 2.0 (CAN/ISO15765)
K-line (ISO9141/ISO14230(KWP2000)/dual K line)
- J2534 PassThru support with Windows DLL
- Standalone datalogs to microSD / microSDHC card without a laptop
- Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector
- Able to log from Innovate Motorsports 2.5mm stereo MTS data bus
- RGB status LEDs
- Supports 12 volt vehicles (support for 24 volt vehicles coming soon in a future hardware revision)
Designed, manufactured, assembled, and tested in San Francisco, CA USA
*Only unused electrical items can be returned within 7 days as long as
they are unopened and in their original, sealed packaging. Do not open the
retail package if you are not sure you want to keep the hardware. We
will deduct the 20% restocking fee to cover our time spent shipping your order and
then processing your return, if it arrives in the same new/sealed
condition you received it in. If the return arrives with either the
packaging or hardware damaged, it will affect the amount of your return
depending on the extent of the damage.
If the item has been installed in a vehicle, connected to PC, or used to reflash/read/write/test/log/etc. from an ECU,
it is considered USED and NON-RETURNABLE. We reserve the right and have the ability to test all returned units to verify that they have not been powered-up since shipping new.
1998-2015 Mitsubishi Evo V-X 2008+ Mitsubishi Lancers DE, ES, GT and GTS (2.0L and 2.4L) Most Subarus
|